-
English
At ISLE 2026 in Shenzhen, LED displays were no longer judged only by their creative shapes. Buyers also focused on image quality, structural precision, outdoor protection and whether a design could be installed reliably in a real project.
TOOSEN showcased several spherical and custom-shaped LED displays at the exhibition. Among them, the spherical LED screen attracted the most inquiries and orders.
This response reflects the growing demand for LED sphere displays in exhibitions, shopping malls, museums, retail spaces and outdoor landmarks. Compared with a conventional flat display, a sphere provides 360-degree visibility and creates a stronger visual focus.
However, building a stable LED sphere is not simply a matter of bending standard panels. The module design, sphere diameter, pixel pitch, supporting structure, control system and content format must all work together.
See more products and booth displays in TOOSEN’s ISLE 2026 exhibition highlights.
A conventional LED screen normally presents content from one main viewing direction. A spherical LED screen creates a different experience because visitors can walk around it and see content from multiple angles.
Its practical advantages include:
At ISLE 2026, some buyers were looking for a small fine-pitch sphere for close viewing. Others needed a large outdoor sphere for a commercial plaza or landmark project.
These applications require different specifications. A small indoor display needs fine image detail, while a large outdoor sphere requires greater brightness, environmental protection and structural strength.
There is no single configuration suitable for every project. The diameter, pixel pitch and installation method should be selected according to the actual environment.
Large outdoor spheres are visually impressive, but reducing the diameter can make manufacturing more difficult.
As the diameter becomes smaller, the surface curvature increases. The modules must follow a tighter curve while maintaining accurate pixel alignment. The internal structure must also support the modules without creating obvious gaps, uneven surfaces or distorted images.
A sphere cannot be assembled efficiently from ordinary flat cabinets alone. Flexible or specially designed modules are needed to follow its curved surface.
TOOSEN develops customized module layouts and structural designs according to the required diameter and pixel pitch. The modules are arranged around the structure to create a smooth outline and consistent image performance.
A small positioning error may become more visible when it is repeated around the entire sphere. Accurate module placement and structural fabrication help control gaps and maintain the round shape.
The internal structure must also leave enough space for power supplies, receiving cards, signal cables and maintenance access.
Standard rectangular videos may look stretched or distorted when displayed directly on a sphere.
Content should be mapped according to the spherical surface and the main viewing directions. This is especially important for planets, globes, brand graphics, text and immersive animations.
Content testing before installation can help identify distortion and prevent important visual elements from appearing in the wrong position.
An outdoor spherical LED screen must withstand rain, dust, temperature changes and long operating hours.
TOOSEN outdoor models are available with IP65 protection, while indoor models are rated IP45. Outdoor configurations also provide higher brightness to maintain visibility in daylight.
TOOSEN supplies indoor and outdoor LED sphere displays. The diameter and pixel pitch can be selected according to the installation space, viewing distance, image requirements and budget.
| Item | Available specification |
|---|---|
| Product names | Spherical LED Screen / Sphere LED Display / Ball LED Display / Globe LED Video |
| Application | Indoor and outdoor |
| Color configuration | 1R1G1B |
| Standard diameters | 0.2m, 0.3m, 0.4m, 0.5m, 0.8m, 1m, 1.2m, 1.5m, 2m, 2.5m, 3m, 4m, 5m, 6m, 7m, 8m, 9m and 10m |
| Available pixel pitches | P1.2, P1.5, P1.8, P1.9, P2, P2.5, P3, P4, P5, P6, P8 and P10 |
| Waterproof rating | Indoor IP45 / Outdoor IP65 |
| Refresh rate | 3,840–7,680 Hz |
| Brightness | 800–6,000 cd/m² |
| Control system | Synchronous or asynchronous |
| Operating temperature | -40°C to 70°C |
| Power supply | 110–240V AC |
| Power consumption | 150 W/m² |
| Manufacturing service | OEM and ODM |
| Place of origin | Shenzhen, China |
Specifications may vary depending on the diameter, pixel pitch, installation method and operating environment. Final parameters should be confirmed after the project requirements have been evaluated.
View available sizes, pixel pitches and configurations on the TOOSEN spherical LED screen product page.
An indoor spherical LED screen is usually viewed from a shorter distance. A finer pixel pitch is more suitable when visitors need to see text, logos or detailed video content.
| Sphere diameter | Recommended pixel pitch | Suggested viewing distance and application |
| 0.2–0.5m | P1.2 / P1.5 | 0.2–0.5m; reception desk |
| 0.8m | P1.25 | 0.5–1m; exhibition hall |
| 1–2m | P1.5 / P1.8 / P2.5 | 1–2m; museum atrium |
| 2m or larger | P2.5 | 2–4m; exhibition hall |
A small LED sphere placed on a reception desk requires fine image detail because viewers may stand very close to it. A larger sphere installed in a museum atrium can use a wider pixel pitch because visitors normally view it from farther away.
The type of content also matters. Small text and detailed product images generally require a finer pixel pitch than simple animations or decorative effects.
Outdoor projects require a different balance of brightness, viewing distance, image detail, waterproof protection and structural stability.
TOOSEN outdoor spherical LED screens provide brightness options of up to 6,000 cd/m² and an IP65 protection rating. Available outdoor pixel pitches include P2.5, P3, P4, P5, P6, P8 and P10, depending on the project.
| Sphere diameter | Recommended pixel pitch | Suggested viewing distance and application |
| 1–1.5m | P2.5 | 1–3m; plaza or entrance |
| 2–10m | P5 | 2–100m; shopping mall or commercial space |
| 10–30m | P8 | 10–300m; plaza or entrance |
| 30–100m | P10 | 300m or more; city landmark |
For example, a 1.2m sphere installed near a building entrance may use P2.5 because people will view it from a short distance. A much larger landmark sphere can use P8 or P10 because it will normally be viewed from farther away.
Pixel pitch is only one part of the selection process. The local climate, installation height, wind load, foundation, maintenance access and power supply should also be evaluated.
A large outdoor sphere requires a project-specific structural solution rather than only a standard product specification.
A custom LED sphere display can function as both a digital screen and a visual feature. Its applications depend on its diameter, resolution, brightness and installation method.
An LED sphere can present rotating product graphics, logos, global networks and themed animations. Its shape helps a booth stand out among conventional rectangular displays.
Spherical displays are suitable for presenting Earth, planets, astronomy, climate, geography and scientific data. Visitors can walk around the display and view information from different sides.
Shopping malls can use an LED sphere for seasonal campaigns, brand promotion, product launches and digital decoration.
Small models can be placed at store entrances or reception desks. Larger spheres can be suspended in an atrium to create a central visual feature.
A hanging sphere can become part of a stage design. A refresh rate of 3,840–7,680 Hz also supports camera-friendly performance for concerts, broadcasts and live events.
Indoor spheres can display brand graphics, welcome messages and digital artwork in hotel lobbies, meeting areas and corporate reception spaces.
A waterproof LED ball display can be used for outdoor advertising, public art and landmark installations.
Large outdoor spheres are suitable for commercial districts, tourism projects, plazas and building entrances where the display must remain visible from different directions.
Spherical screens attracted the most attention at TOOSEN’s ISLE 2026 booth, but they also represent part of the company’s wider custom manufacturing capability.
The TOOSEN custom-shaped LED display range includes:
A custom display project should begin with a technical review. The manufacturer needs to understand the design, dimensions, viewing distance, environment, installation method and available budget.
Early technical involvement can identify difficult or unnecessary structural elements before production begins. It can also help the customer select a suitable pixel pitch without paying for image detail that cannot be seen from the intended viewing distance.
The goal is not only to produce an unusual shape. The finished display must also be stable, practical to install, easy to maintain and suitable for the planned content.
TOOSEN is a Shenzhen-based spherical LED screen manufacturer providing OEM and ODM services for indoor, outdoor and customized projects.
Customers can select from multiple diameters, pixel pitches, brightness levels and installation methods. Synchronous and asynchronous control systems are available according to how the content will be managed.
TOOSEN can also assist with:
For non-standard projects, the technical team can review drawings and reference images before recommending a solution.
To prepare an accurate quotation, customers should provide:
If the pixel pitch has not been selected, TOOSEN can recommend an option based on the diameter, viewing distance, content and budget.
The response at ISLE 2026 showed that spherical LED screens are moving beyond decorative installations. Buyers now expect creative design to be supported by clear images, accurate construction, outdoor protection and practical maintenance.
TOOSEN supplies indoor and outdoor spherical LED screens with standard diameters from 0.2m to 10m, along with larger customized solutions. Available configurations cover pixel pitches from P1.2 to P10, refresh rates from 3,840 to 7,680 Hz and synchronous or asynchronous control systems.
Whether a project requires a small fine-pitch sphere for a reception desk or a large outdoor display for a city landmark, the solution should be designed around the actual viewing and installation environment.
Contact TOOSEN with your required diameter, application, viewing distance, destination country and installation method. Our team will help you select a suitable spherical LED screen configuration and prepare a customized proposal.
A spherical LED screen is a digital display built around a ball-shaped structure. It uses flexible or customized LED modules to present images and video across a curved surface.
Yes. Its curved surface allows content to be viewed from multiple directions. The final viewing effect depends on the module layout, installation position and content mapping.
Yes. TOOSEN provides outdoor spherical LED screens with IP65 protection and brightness options of up to 6,000 cd/m². The supporting structure must also be designed for the local environment.
Standard options start at 0.2m and extend to 10m. Larger customized diameters can be evaluated according to structural, transportation and installation requirements.
+86 18688923792
+86-755-23312336
4th Floor, Building B, Zhonghe Building, Taiwan Industrial Zone, 2132 Songbai Road, Shiyan Street, Bao'an District, Shenzhen.
Emall us with any questions or inquiries or use our contact data.We would be happy to answer your questions.
Toosen Professional Manufacturer of led sphere display,led screen globe,led ball display,spheric led screen,spherical led display, Led Special-shaped LED manufacturer, LED factory,Manufacturers & Suppliers,Factory & Exporters. Looking forward to your cooperation.
Copyright © 2010-2026 Toosen LED All Rights Reserved
Theme by WordPress