TOOSEN’s advice on cleaning and maintenance of outdoor LED displays

LED display in the use of a period of time, there will be dust and other debris affecting the display accumulation, regular cleaning and maintenance of LED display, can extend the life of the LED display, improve the quality of the use of LED display. So the LED display cleaning maintenance are particularly important, the following are some easy ways to clean the LED display, to introduce you.

The cleaning of outdoor LED displays is divided into pre-installation and post-installation cleaning.
Pre-installation cleaning.

At this time the LED display is semi-finished products, is the LED module has not been installed kit. At this time, the cleaning should be cleaned with a special washboard water, the LED module will be dipped in some washboard water and then scrubbed with a brush to accelerate the dissolution of rosin and flux off to remove dust and impurities, this step of cleaning is completed by the manufacturer.
Cleaning after installation.

In order to remove the dust and impurities accumulated after a period of time, the first thing to consider buying a better quality cleaning kit, the cost of cleaning solution generally includes electrolyte, high-purity distilled water, anti-static liquid, etc., can effectively clean the LED display on the dust and other dirt marks. Some netizens think that water can also, and will not affect the outdoor LED display. However, the cleaning effect of water is relatively poor, and after cleaning the dust will be attached again. Of course, if you want to save money, with water can also be okay, always better than those of unknown origin cleaning solution.

At the same time, it is important to note that the water should not be sprayed on the screen, but a small amount of cleaning solution should be sprayed on the cleaning cloth, and then gently wipe in the same direction, and before cleaning, the power cord needs to be unplugged.